Siemens S7-300 Installation And Operating Manual page 5

Position in the IT environment
The additional references you require for working with fail-safe modules are listed below.
This manual contains corresponding cross-references to additional documentation.
ET 200M Distributed I/O
Device
Operating instructions
300, CPU 31xC and CPU
31x: Installation
Reference manual
Automation Systems S7-300,
ET 200M
Ex I/O Modules
Manual
Principles of Explosion
Protection
Safety Engineering in
SIMATIC S7
description
for integration in the S7 F/FH
fail-safe system
Fail-safe signal modules
Installation and Operating Manual, 01/2010, A5E00085586-10
Documentation
Describes the ET 200M hardware (including the configuration,
Manual assembly and wiring of IM 153 in combination with modules of the
S7-300 family)
S7-
Describes the configuration, installation, wiring, addressing, and
commissioning of S7-300 systems
The SM 326; DI 8 × NAMUR is part of the SIMATIC S7 Ex digital
module family. It is to be used in compliance with installation
, guidelines for SIMATIC S7-Ex digital modules.
The reference manual provides detailed guidelines for the
configuration of SIMATIC S7-Ex digital modules.
Automation Systems
Describes the basic principles of explosion protection

system






Brief description of relevant contents
Provides an overview of the use, configuration and functionality of
S7 Distributed Safety and S7 F/FH fail-safe automation systems
Contains a summary of detailed technical information relating to
fail-safe engineering in S7-300 and S7-400 systems
Includes information on the calculation of monitoring and
response times of S7 Distributed Safety and S7 F/FH fail-safe
systems
S7 F/FH Systems Configuring and Programming
The
describes the tasks required to create and commission an S7
F/FH System fail-safe system.
Automation System S7-400, M7-400, Hardware and
The
Installation
Manual describes the installation and wiring of S7-400
systems.
S7-400H Programmable Controllers, Fault-Tolerant Systems
The
manual describes the CPU 41x-H central modules and the tasks
required to set up and commission an S7-400H fault-tolerant
system.
CFC for SIMATIC S7
The
programming with CFC.
manual/online help describe
Preface
manual
5