Sm 326; F-Do 10 X Dc 24V/2A Pp (6Es7326-2Bf10-0Ab0); Properties, Front View, Wiring Diagram And Block Diagram - Siemens S7-300 Installation And Operating Manual

8.7

SM 326; F-DO 10 x DC 24V/2A PP (6ES7326-2BF10-0AB0)

8.7.1

Properties, front view, wiring diagram and block diagram

Order number
6ES7326-2BF10-0AB0
Properties
SM 326; F-DO 10 x DC 24V/2A PP has the following properties:
● 10 outputs, two electrically isolated groups of 5
● Output current 2 A
● Rated load voltage 24 V DC
● Protection against short circuit and overload
● Suitable for solenoid valves, DC relay contactors, and signal lamps
● Assignable redundant operation
● Operation in safety mode
● SIL3/Cat.4/PLe can be achieved without safety protector
● Group fault display (SF)
● Safety mode display (SAFE)
● Status display for each channel (green LED)
● Display of channel-specific errors (red LED)
● Programmable diagnostics functions
● Programmable diagnostic interrupt
● Firmware update via
● I&M identification data
● can be used with PROFINET IO
● "Keep last valid value" parameter
● Simplified redundant circuit
● Channel-selective passivation
Note
The fail-safe performance characteristics in the technical data apply to a proof-test interval of
20 years and a mean time to repair of 100 hours.
Fail-safe signal modules
Installation and Operating Manual, 01/2010, A5E00085586-10
8.7 SM 326; F-DO 10 x DC 24V/2A PP (6ES7326-2BF10-0AB0)
HW Config
Digital modules
161