Tripp Lite U339-004 Owner's Manual page 5

Offline Cloning
6. Power on the docking station using the ON/OFF button on the
back of the unit. The red Power LED will illuminate to indicate
unit is receiving power. The red Drive LEDs will illuminate to
indicate a hard drive is connected to the corresponding port and
is ready for cloning.
7. Press the Clone button on the front of the unit twice, pausing
several seconds after the first press, and then release.
8. The 20% Progress LED will blink when cloning begins. The
Progress LEDs will illuminate red to indicate the percentage of
cloning completed as the process continues.
9. When all of the Progress LEDs are illuminated solid red, the
cloning process is complete.
16-07-125-93360E.indb 5
5
8/9/2016 2:44:55 PM