Jenn-Air su110 Use And Care Manual page 4

ing elements may be hot even though they are dark in color.
Areas near surface units and interior surfaces of an oven
may become hot enough to cause burns. During and after
use, do not touch or let clothing or other flammable mate-
rials contact these areas until they have had sufficient time
to cool. Other surfaces may become hot enough to cause
burns --among these surfaces are the cooktop, the upper
door frame and glass, oven vent opening and surfaces near
the opening, and the top edge of the control panel.
18. Use care when opening oven door. Let hot air or steam
escape before removing or replacing food.
19. Do not heat unopened food containers. Build-up of pres-
sure may cause container to burst and result in injury.
20. Keep oven vent ducts unobstructed.
21. Always place oven racks in desired location while oven is
cool. If rack must be moved while oven is hot, do not let
potholder contact hot heating element in oven.
22. Clean only parts listed in this manual and use procedures
recommended.
23. Do not cook on glass-ceramic cooking surface if the cook-
top is broken. Cleaning solutions and spillovers may pene-
trate the broken cooktop and create a shock hazard.
Contact an authorized Jenn-Air Service Contractor.
24. Clean glass-ceramic cooktops with caution. If wet sponge
or cloth is used to wipe spills on a hot cooking area, be
careful to avoid steam burns. Some cleansers can produce
noxious fumes if applied to a hot surface.
25. Do not operate with damaged cooking element after any
product malfunction until proper repair has been made.
26. Keep all switches "OFF" when unit is not in use.
27. High performance range hood must be operated in con-
junction with grill.