Table of Contents
Advertisement
Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
9.1.8
Removing keypad holder from Main Board
To remove the keypad holder, simply pull outwards at both the clips at the side of the keypad holder so that it is
released from the PCBA main board.
Remove the microphone from the keypad holder
Using a tool or finger, push the microphone towards the back until it comes off the keypad holder
9.1.9
Removing the color LCD
Disconnect the LCD connector and the LCD
assembly can now be removed from the Main Board.
The LCD must be handle carefully. Handle it by the
edges. Do not put your fingers on the glass.
During repair operations , keep it in a dust free
location to prevent from dust contamination and
scratches.
PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
COMPANY RESTRICTED
VY-V-640-82x
Page : 58 of 71
Langue : EN
Date : 25/02/03
VY-V-640-82x
Advertisement
Table of Contents
