Downloading A Driver Card With The Dtco 1381, Rel. 1.4 And Later Releases - VDO DLKPro Download Key User Manual

4 Downloading data

Downloading a driver card with the DTCO 1381, Rel. 1.4 and later releases

Note: With the DTCO 1381, Rel. 1.4 and later releases,
you can download driver card data without inserting a
company card, control card or workshop card.
If the driver card has not yet been inserted into the
DTCO, please insert it now.
Open the cover of the DTCO's download interface.
Remove the cover from the DLKPro's download
plug.
Insert the DLKPro's download plug into the
download interface of the DTCO.
When the DLKPro is connected, its LED flashes
green.
A progress bar shows how the download is
progressing.
When the download has finished, the LED on the
DLKPro remains green and beeps indicate that the
download was successful; see note on page 9.
DLKPro Download Key • Operating Instructions – Edition 03/2012
When the data has been transferred, remove the
DLKPro from the download interface.
Replace the cover and close the DTCO's download
interface.
You can then view the downloaded data either on the
screen or in the "DownloadTools" PC programme; see
pages 11 and 21.
Note: If the download was not successful, the LED on
the DLKPro flashes red and intermittent beeps can be
heard.
• In this case, check whether or not the DLKPro has
enough memory available; see page 13.
• Try the download again, e. g. with the chip card
reader.
If the download fails a second time, use the
PC programme to collect the support files and
contact your service partner; see page 31.
9