Powering Up; Setting Current Time; Starting Up Your Sauna - Health Mate Enrich mate Owner's Manual

3) powering up

1. Plug in the power cord to the electrical outlet. All lights on the LED Control Panel will flash once.
2. During Off mode, only the Health Mate logo and Current Time will display.

4) setting current time

1. While the power if turned Off, the current time will be displayed.
2. During Off mode, double-tap the Clock button until the display
flashes.
3, When the clock has been set to the desired time, wait 3 seconds
and the clock will be set.

5) starting up your sauna

1. Tap and hold the Power button for approximately 5 seconds
to start up your sauna.
2. The temperature display will indicate the current cabin
temperature. If the ambient temperature within the cabin is
below 90ºF/30Cº, the display will read "LO".
healthmatesauna.com
b. getting started
3. The time display will indicate the sauna session time. When
the time button is tapped, it will change the time in five
minute increments. Maximum session time is 60 seconds.
4. The Light button will illuminate to indicate that the interior
LED panel is turned on. To turn Off, simply tap Light again.
Adjusting Hours
Time is Displayed in 24-Hour Format
Adjusting Minutes
Tap to Add 1, Hold to Add 10
13