Operating Characteristics - Kidde KN-COPP-B-LS User Manual

2522-7206-00(820-1727 A)-R1:Layout 1
5. Model KN-COB-B-LS-UK (900-0233)

Operating Characteristics

Whenever the alarm is operating, the green Power LED flashes every 30
seconds to indicate the unit is monitoring for CO. If the alarm senses
dangerous levels of CO, the red Alarm LED will flash and the alarm will
emit an audible alarm pattern.
Operating and Alarm Characteristics
Function LED Display
Normal Green LED
Operation flashes every 30
seconds
Carbon Red LED flashes
monoxide with beeps.
alarm
Low Red LED flashes
battery every 30 seconds
Error / Red LED flashes
service every 30 seconds
alarm
Error Red LED
constantly on
Normal Red LED flashes
Test/Reset with beeps.
function Green LED on
End of Red LED flashes
unit life twice every 30
indicator seconds
6. Model KN-COPP-B-LS-UK (900-0230)
(with digital display) Operating Characteristics
When the unit is first powered up, the green Operate LED flashes once
every 30 seconds and the digital display will show three "eights" –
indicating the alarm is in the start-up mode. The three "eights" will
remain for approximately 30 seconds. Then, the alarm will display "0" and
begin monitoring the air for CO and will continue to do so as long as it
receives power.
This alarm will display a "0" if CO concentrations between 0 and 30 PPM
have been detected within the last 15 seconds.
Alarm Sound Unit Status
None Normal DC
operation (sensing
no CO) and with
good batteries
Repeating Alarm condition.
ON/OFF beeps Dangerous
concentrations of
CO detected
One quick Batteries need to be
beep every replaced
30 seconds
One quick Unit is in error
beep every condition
30 seconds
Constant Very low battery or
alarm unit malfunction
Repeating Normal operation
ON/OFF beeps when Test/Reset
button is pressed
Two quick End of unit life
beeps every
30 seconds
2009.8.19
Recommendation
None
Refer to "What to do
When the Alarm
Sounds" (inside front
cover)
Replace all three AA
batteries
Replace battery.
If condition continues,
unit has
malfunctioned.
Replace immediately.
Unit will not respond
to CO
CO not detected.
Alarm for test
purposes only
Replace unit
immediately. Unit will
not respond to to CO
6:51 PM