Firex betterpan DBRG series Owner's Instruction Manual page 22

MAX TEMPERATURE 3
**********************************
SAFETY THERMOSTAT
**********************************
SYSTEM ERROR
**********************************
CONN ERROR
**********************************
Owners' Instruction Manual – Tilting Bratt-Pan with electronic control "BETTERPAN – DBRG... - DBRE..."
There is too much heat near
the electronic components.
The appliance safety
thermostat is ON. The
appliance is disabled.
Card system error.
Error in the connection
between the relay card and
the keyboard card.
Check if the control panel
and/or the adjacent
panels are very hot.
If so, eliminate any
sources of heat near the
electronic components of
the appliance. If the
panels are not hot, apply
to a service centre.
The safety thermostat
can reset during transport
without any failure
occurs.
Remove the lower control
panel on the right and
reset the thermostat,
pressing the red button
on the thermostat itself
with energy.
If the thermostat should
be activated again, apply
to a service centre for
technical assistance.
Apply to a service centre
for technical assistance.
Turn the appliance OFF
and then ON after two
minutes. If the problem is
not solved, apply to a
service center for
technical assistance.
22