Cruise Control Activation; Programmed Speed Icon Flashing; Speed Limit Programming; Exceeding The Programmed Speed - Alfa Romeo giulia Owner's Handbook Manual

162

SPEED LIMIT PROGRAMMING

The speed limit can be programmed on
the Connect system.
To access the function, on the main menu
select the following items in sequence:
"Settings", "Safety" and "Speed Limiter
Set Speed".
By turning the Rotary Pad, the speed
increases by 5 mph (5 km/h), from a
minimum of 20 mph (30 km/h) to a
maximum of 110 mph (180 km/h).

EXCEEDING THE PROGRAMMED SPEED

By fully depressing the accelerator pedal,
the programmed speed can be exceeded
even with the device active (e.g. in the
event of overtaking).
The device is disabled until the speed
drops below the set limit, after which it
reactivates automatically.

PROGRAMMED SPEED ICON FLASHING

The programmed speed flashes in the
following cases:
when the accelerator pedal has been
fully depressed and the vehicle has
exceeded the programmed speed;
activating the system after setting a
limit below the effective speed of the
vehicle;
in the event of sharp acceleration.
07136S0001EM
DEACTIVATING THE DEVICE
The function can be activated/
deactivated on the Connect system.
Deactivating the device
To access the function, on the main menu
select the following items in sequence:
"Settings", "Safety", "Speed Limiter" and
"off".
Automatic deactivation of the device
The device deactivates automatically in
the event of fault in the system. In this
case, contact an Alfa Romeo Dealership.
Temporary signal loss
When the devices loses the signal, the
white symbol without the speed
indication lights up on the display.
System failure
When the system is in failure, the amber
symbol lights up on the display.
CRUISE CONTROL
This is an electronically controlled driving
assistance device that allows the desired
vehicle speed to be maintained, without
having to press the accelerator pedal.
This device can be used at a speed above
40 km/h on long stretches of dry, straight
roads with few variations (e.g.
motorways).
It is therefore not recommended to use
this device on extra-urban roads with
traffic. Do not use it in town.
The Cruise Control buttons are located
on the left side of the steering wheel.
To ensure correct operation, the Cruise
Control is designed to deactivate if more
than one function is operated
simultaneously. In this case the system
can be reactivated pressing button
and setting the desired speed.
Travelling downhill, the system could
brake the vehicle to keep the set speed
unvaried.
ACTIVATING THE DEVICE
117) 118) 119)
To activate the device press button
fig. 163.
The activation of the device is signalled
by the switching on of the white warning
light on the display.
The Cruise Control function can remain
active concurrently with the Speed
Limiter system. If a speed limit below the
one indicated in the Cruise Control is
155