Main Beam Headlights; Automatic High Beam Headlights; Blinking - Alfa Romeo giulia Owner's Handbook Manual

IMPORTANT To activate this function the
headlights must be deactivated within
2 minutes after the ignition device has
been taken to STOP.
Function deactivation
This function is deactivated by switching
on the headlights, the side lights or
bringing the ignition device to ON.
AFS FUNCTION (Adaptive Frontlight
System)
(where provided)
This is a system combined with Xenon
headlights (Bi-Xenon 35 W headlamp
version) which directs the main light
beam, horizontally and vertically, and
continuously and automatically adapts it
to the driving conditions round
bends/when cornering.
The system directs the light beam to light
up the road in the best way, taking into
account the speed of the car, the
bend/corner angle and the speed of
steering.
The adaptive lights are automatically
activated when the car is started.

MAIN BEAM HEADLIGHTS

To activate the fixed main beam
headlights push the left lever towards
the instrument panel fig. 48. The light
switch must be turned to AUTO or
With main beam headlights on, the
warning light/icon on the instrument
panel will come on at the same time.
40
48
The main beam headlights are switched
off by pushing the left stalk again.
Warning light/icon
instrument panel.

Blinking

The flashing of the main beam headlights
is activated by pulling the left stalk
towards the steering wheel, the lights
remain on while you are operating the
lever.

Automatic high beam headlights

(where provided)
In order not to dazzle other road users,
the lights are automatically deactivated
when approaching vehicles travelling in
the opposite direction or when following
a vehicle travelling in the same direction.
.
This function is enabled with the Connect
system and with the light switch turned
to AUTO.
The first time the main beam headlights
are activated (pushing the left lever), the
function is activated (the warning light
or the
instrument panel).
If the main beam headlights are actually
on, the blue icon/warning light
come on in the instrument panel.
When the speed is higher than 35 mph
(60 km/h) and the function is active, the
lights switch off if the left stalk is pushed
again.
When the speed is lower than 15 mph
04126S0020EM
(25 km/h) and the function is active, the
function switches the main beam
headlights off.
If the fixed main beam headlights are
switches off in the
operated quickly again (pushing the left
stalk towards the instrument panel), the
warning light/icon
instrument panel and the main beam
headlights will be switched on constantly
until the speed exceeds 35 mph
(60 km/h).
When the speed of 35 mph (60 km/h) is
exceeded again, the automatic
functioning is reactivated.
If the left stalk is pushed again in this
condition, to request main beam
headlight deactivation, the function
deactivates and the main beam
headlights switch off.
To deactivate the automatic function rotate
the light switch ring nut to position
symbol comes on in the
will also
will switch on in the
.