Air Conditioner Parameters Display; Operating Mode Of The Climate Control System - Alfa Romeo giulia Owner's Handbook Manual

Description
The automatic bizone air conditioner
adjusts the temperature and air
distribution in the cockpit independently
between the driver and passenger.
The system maintains comfort inside the
passenger compartment and
compensates for possible variations in
outside weather conditions.
NOTE The reference temperature is
72°F (22°C) for optimal comfort
management.
The automatically controlled parameters
and functions are:
air temperature at the driver/front
passenger side vents;
air distribution at the driver/front
passenger side vents;
fan speed (continuous variation of the
air flow)
compressor engagement (for
cooling/dehumidifying the air);
air recirculation.
All these functions can be adjusted
manually by operating the system and
selecting one or more functions and
modifying their parameters.
Manual selections always have higher
priority than automatic settings and are
stored until the AUTO button is pressed,
except for cases in which the system
intervenes for safety reasons.
The following operations do not
deactivate the AUTO function:
recirculation activation/deactivation;
compressor activation/deactivation;
MONO function activation;
heated rear window activation/
deactivation.
The temperature of the air sent is always
automatically controlled according to the
temperature set on the display (except
for when the system is off or in certain
conditions when the compressor is not
running).
The system allows the following to be set
or adjusted manually:
driver/passenger side air
temperature;
fan speed (continuous variation);
air distribution in 7 positions for driver
and passenger side;
compressor enabling;
rapid defrosting/demisting function
air recirculation;
heated rear window;
system deactivation.
Operating mode of the climate control
system
The climate control system can be
activated in different ways: it is advisable
to press the AUTO button and turn the
knobs to set the desired temperatures.
In this way the system operates
completely automatically to adjust the
temperature, quantity and distribution of
the air introduced into the passenger
compartment. It also manages the air
recirculation system and the enablement
of the air conditioning compressor.
During automatic operation, you can
change the set temperatures,
activate/deactivate the rear window
heater, activate the MONO function,
activate/deactivate the compressor and
the recirculation at any time by using the
relevant buttons or knobs: the system
will automatically change the settings to
adjust to the new requirements.
AIR CONDITIONER PARAMETERS
DISPLAY
The air conditioner parameters can be
viewed on the Connect system display.
There is a dedicated "hidden" pop up 1
fig. 64 on the Connect system display,
which activates by pressing or rotating
the air conditioner buttons or knobs
without a status LED. If no operations are
performed for a preset period of time,
the pop up on the display will disappear.
64
04156S0006EM
49