Sony DVP-PQ1 Service Manual page 12

DVP-PQ1
Q Q
3 7 6 3 1 5 1 5 0
Connecting to your TV
Connecting
You can enjoy standard quality picture and sound using this
the Player
connection. Before connecting, make sure that your TV is turned off.
To enjoy better picture and sound, refer to the Brown Side of this
manual. Refer also to the instruction manuals of the components to
be connected.
Basic connection
AC power
sour ce (mains)
AC power
sour ce (mains)
To VIDEO OUT To AUDIO OUT L
To video input
To AUDIO OUT R
To audio input
White
Yellow
Yellow Red
Red
Connect the audio/video cord (supplied).
Then, connect the player and the TV to an AC power source (mains).
Functions
Using the
Remote
Note
Some playback featur es of DVDs and VIDEO CDs described in the following may be prohibited
by the softwar e producers. Refer to the instructions supplied with the DVDs and VIDEO CDs.
Basic operations (A)
To change the playing mode, sound To Press
effect, and display, or to use the DVD's
play H
menu.
T E
stop L x 1 3 9 4 2 2 9 6 5 1 3
c
"Functions"
pause X
To read disc information on the screen.
go to the next or > NEXT or .PREV during playback.
c
"Reading the screen"
previous title* or
track*
Remote
scan forward or My or m y during playback.
backwar d Press the button repeatedly to change the speed.
The letters below correspond to the letters in
To return to normal playback, press H.
"Functions." Use the letters to quickly find the
play forwar d or My or m y during pause. (DVD/VIDEO CD only.
buttons needed for each operation.
backwar d in Functions only in the forward direction for VIDEO CDs.)
Press to slow motion Press the button r epeatedly to change the playback speed.
C turn the To return to normal playback, press H.
player on.
=/1 replay REPLA Y during playback. (DVD only)
B REPEAT SUR
Press to
SHUFFLE AUDIO TV VOL adjust the *See "Understanding disc str uctur es" in "Playable discs and special words" on the Brown
+
volume of
Side of this manual for details.
SUBTITLE ANGLE
D Sony TVs.
Selecting the playing mode (B)
PREV NEXT CLEAR Press to
. > cancel the
You can play a selected title or track randomly or repeatedly .
SCAN/SLOW REPLAY current
m M
mode.
To cancel the operation, press the following button repeatedly to select "OFF" or
A
PAUSE
PLAY STOP
X press CLEAR.
H x
TOP MENU MENU
To Press
DISPLAY RETURN
O
shuffle SHUFFLE repeatedly during playback. (DVD/VIDEO CD/CD
E F
only)
ENTER
repeat REPEAT repeatedly during playback.
When you select Repeat Play during Shuf fle Play, Shuffle Play is
repeated.
Ther e is a tactile dot on H and the "+" button of
TV VOL.
w w w
Basic steps and tips on playback
Playing
You can play DVDs, VIDEO CDs, music CDs, as well as MP3 audio
Discs
tracks recorded on a DATA CD*.
Buttons on the player that share the same symbol with buttons on
the remote also share the same function.
*A CD-R/CD-R W/CD-ROM with MP3 audio tracks recor ded on the disc is called a "DATA CD" in
this manual.
Notes on connecting to your TV
• Do not connect this player directly to a On your TV :
component such as a VCR. If you do, noise
Turn your TV on and
may appear in the picture.
select the video input.
• When connecting this player to a monaural
TV, use a ster eo-mono conversion cord (not
supplied).
To insert batteries in the remote
(remote sensor)
Turn on the player
TV Slide open the cover . Insert two AA (R6) size
by pressing ?/1
batteries by matching the + and – ends with
(on/standby).
the markings inside the compartment, and
close the cover .
For European
models only:
Connect using the
EURO AV Adaptor
(supplied). ?/ 1 indicator
Connecting the EURO AV Adaptor Lights up when
turned on.
(For European models only)
White
Attach the Euro AV Adaptor (supplied) to your =/1
REPEAT SUR
?/ 1
TV. Then, connect the audio/video cord to the
SHUFFLE AUDIO + TV VOL
TV VOL (volume) +/–
corresponding jacks of the Euro AV Adaptor .
SUBTITLE ANGLE
./ > PREV NEXT CLEAR
TV . >
SCAN/SLOW REPLAY
m M
PAUSE
PLAY STOP
H X
H x x
TOP MENU MENU
DISPLAY RETURN
O
O
B/ V/ v/ b/ ENTER
ENTER
Audio input (R)
See "Using the remote" at the bottom half of this
Audio input (L)
page for more details on the remote.
Video input
Changing the sound (C) Changing the viewing angle and subtitles (D)
You can change the audio language for DVDs r ecor ded with multilingual tracks. You can select picture angles if ther e are multiple pictures (angles) recor ded on the
When listening to a Karaoke VIDEO CD, you can turn off the vocals. You can also disc, or change subtitle languages in multilingual DVDs.
enjoy this player 's surr ound effect mode.
To Press
To change Press
change angles ANGLE repeatedly during playback to select the number of the
angle you want to play. (DVD only)
language/sound AUDIO repeatedly during playback to select from the options.
In DVDs: Select a language from the options on the scr een.
display or SUBTITLE repeatedly to select the subtitle language. (DVD only)
(When a 4-digit number is displayed, check the number in the
change subtitles (When a 4-digit number is displayed, check the number in the
"Language Code List" on the Brown Side of this manual.)
"Language Code List" on the Brown Side of this manual.)
In VIDEO CDs/CDs/DATA CDs:
To cancel the subtitle, press SUBTITLE repeatedly to select
• STEREO: To hear standar d ster eo sound.
"OFF."
• 1/L: To hear the sound of the left channel from both speakers.
• 2/R: To hear the sound of the right channel from both speakers.
Using the DVD's menu (E)
In Super VCDs (For Asian models only):
(The number befor e the colon shows the number of the audio When a menu is recor ded on the DVD, you can usually select items such as the
track being played. For the meaning after the colon, see above.) title, audio language, or subtitles.
• 1: STEREO • 2: STEREO
To display Press
• 1: 1/L • 2: 1/L
• 1: 2/R • 2: 2/R DVD's menu TOP MENU or MENU . Select an item using B/ V/ v/ b, and
press ENTER. (DVD only)
TV Virtual SUR repeatedly during playback to select from the following.
TOP MENU: Displays a menu of available movie and music
Surround settings (DVD only)
titles.
To cancel the surr ound setting, press SUR repeatedly to select
Notes
MENU: Displays a menu of subtitles and audio languages.
"OFF."
• The surr ound mode
• TVS DYNAMIC: To enjoy the surr ound ef fect with your TV's
signals are only
speakers. The distinct sound imaging effect is as if you have a
output when the Displaying information on your screen ( F)
player is connected set of additional speakers next to you.
via the AUDIO OUT You can display information such as the playing time or the disc text on the TV
• TVS WIDE: To enjoy the surr ound effect with your TV's
L/R jack.
scr een.
speakers. The sound imaging effect is as if you have five sets
• Set the surr ound
of virtual speakers filling the area surr ounding you. To return to the normal scr een, press DISPLAY repeatedly .
settings of the
connected
• TVS NIGHT: To enjoy the surr ound mode at a lower volume.
components (such as To display Press
(Dolby Digital audio DVD only)
TV) to off.
• Surr ound does not • TVS STANDARD: To enjoy the surr ound effect with a set of
time/text DISPLA Y during playback. Then press ENTER repeatedly to
function when a disc
front speakers connected to the player . The imaging ef fect is as
switch the display from total playing time to remaining time,
has no rear signal.
if you have three sets of additional speakers around you.
and vice versa. (For details, see "Time display" in the next
section.)
DVD/CD TEXT or MP3 track name will be displayed following
the time display if it is r ecor ded on the disc. (Only the letters of
the alphabet are shown.)
current audio DISPLA Y twice during playback. (DVD only)
format
(For details, see "Audio display" in the next section.)
x a o
. i
1-3
http://www.xiaoyu163.com
To adjust the TV volume (for Sony
products only)
Press TV VOL +/–.
Press H (play).
Note
This function may not be available depending on the
connected TV.
x (stop)
. (previous) To play the next or previous
chapter or track
> (next)
Press > or . during playback.
Press ZPUSH, and gently
To stop playback
lift the lid until it clicks .
Press x.
The next time you press H, playback starts
from the same place. (Resume Play)
To play from the beginning
Press x twice, then press H.
Place a disc on the tray.
Place it label-side up (the recorded To remove the disc
side facing down), and press its
Hold the edges of the disc and pull while
center until it clicks into place. pressing the center .
Close the lid until it
clicks .
Reading the screen
Settings
and
You can display the time or audio format in the
upper ar ea of the TV scr een during playback.
Adjustments
Time display
<Example*>
Current album/title
number
You can select and change the settings of this
• T: title, A: album
player to meet your needs and to suit your
Q Q
playing envir onment.
T11 — 8
T 1:01:57 3 7 6
To change the languages used in
Current chapter/ subtitles, sound, or on-screen displays.
track/index number Time display
c
"Language/Screen/Audio Setup"
• D: disc, T: title or track,
C: chapter
• No mark: Playing time
To adjust the aspect ratio of the picture
With – : Remaining time
to fit your TV.
c "Language/Screen/Audio Setup"
*Here, the disc is playing chapter 8 of the 11th title, which has
been played for 1 hour 1 minute and 57 seconds.
To select the setting of the audio when
Audio display
connected to an amplifier.
<Example*> c
"Language/Screen/Audio Setup"
Current audio format (Dolby
To set playback limitation levels (such as
Digital, DTS, PCM,etc.)
Number of rear to limit violent scenes).
component
c "Limiting Playback" (See the
DOLBY DIGITAL 3 /2 .1
Brown Side of this manual.)
Number of front and Number of LFE
center component (Low Frequency Effect)
component
*Here, the indicated disc's audio format is Dolby Digital
5.1channel (ch).
5.1ch: 3 (Front Left/Right/Center) +
2 (Rear Left/Right) +
0.1 (LFE)
Note
When "DTS" is set to "OFF" in the audio setup
setting, the DTS display will not appear even if the
disc has a DTS signal. (See "Settings and
Adjustments" for details.)
u 1 6 3
y
http://www.xiaoyu163.com
2 4
8 9 9
Playing MP3
audio tracks
from a list
You can select and play MP3 audio tracks from
the list displayed on the menu.
To turn off the player Operating the remote
Selecting an MP3 audio track
Press ?/ 1.
• Point the remote at the remote sensor .
1
If no buttons are pressed for 15 minutes, the
When it does not work, operate closer to the
scr eensaver turns on. To return to the normal remote sensor .
scr een, press H.
• Do not expose the remote sensor to direct
The player automatically turns off in another
sunlight or lighting apparatuses. Doing so
45 minutes.
may cause a malfunction.
If a menu display appears when
If the aspect ratio of the pictur e
you press H
does not match your TV type
In some DVDs and VIDEO CDs, a menu may
In "TV TYPE" of the scr een setup setting,
appear when you press H. The menu usually
select the setting that matches your TV. (See
enables you to select items such as a title
"Settings and Adjustments" for details.)
(movie or album), audio language, or subtitles
by using B/ V/ v/ b and ENTER. In VIDEO
CDs, this function is called PBC (Playback
2
Contr ol).
For Asian models only:
The PBC functions of Super VCDs do not work
with this player .
To return to the menu display while playing
a disc with PBC function
Press O.
To play a disc without using the PBC
function
Press > or . during stop to select a track
(picture or music) that you want to play, and
press H or ENTER.
To return to PBC Playback
Press x twice, and press H.
3
Language/Screen/Audio Setup Selecting the language setup
For the following items, select the language from the Language List
You can change the languages for the OSD (on-
displayed on the scr een.
scr een display) and sound, and adjust the
video and audio output to match the
Item Select
components (such as TV) your player is
OSD The language you want for the player
connected to.
Setup Display.
Setup Display
The numbers correspond to the steps in the procedur e given MENU* The language you want for the menu recor ded on the
below . (DVD only) disc.
2 3
AUDIO* The language you want for the sound.
3 1 5 1 5 0 8 9 2
(DVD only) (ORIGINAL: The language prioritized in the disc is
LANGUAGE SETUP
OSD: ENGLISH 4 automatically chosen.)
MENU: ENGLISH
AUDIO: ORIGINAL
SUBTITLE* The subtitle language.
SUBTITLE: AUDIO FOLLOW
(DVD only)
(AUDIO FOLLOW: The subtitle language changes
accor ding to the audio language.)
*If the language you select her e is not recor ded on the disc, another language will
1 be automatically selected from the disc.
Press DISPLAY repeatedly in stop mode to
show Setup Display.
Hint
2
Select the setup item using V/v, and press When you select "OTHERS," enter the language code from the list on the Brown
ENTER. Side of this manual using V/ v/ b.
LANGUAGE SETUP: To change the
language setting.
Selecting the screen setup
CUSTOM SETUP: To change settings other
than the language.
Item Select
3
Select an item (e.g., "OSD") using V/v,
and press ENTER. TV TYPE* • 16:9
For a wide-scr een TV or a TV
(Change this to fit
Refer to the list on the right for details.
with wide mode function.
the picture to your
4
Select a setting (e.g., "ENGLISH") using
TV.)
V/v, and press ENTER.
Refer to the list on the right for details.
• 4:3 LETTER BOX
For a standar d TV. Displays a
To turn off Setup Display:
wide picture to fit the width of
Press DISPLAY repeatedly until the display the scr een while keeping the same
aspect ratio.
disappears.
• 4:3 PAN SCAN
For a standar d TV. Cuts off
portions of a wide picture in
order to fit the width of the
screen.
COLOR SYSTEM • AUTO: For a DUAL color system TV . (Default
(For Asian models only) setting)
(Select when playing a
• PAL: For a PAL color system TV.
VIDEO CD.)
• NTSC: For an NTSC color system TV.
*The setting r ecorded on the disc has priority.
m
c o
.
1-4 E
2
8 9 9
To display the next or previous page in an
album or track list
Press b or B.
To return to the previous screen
Press O.
To turn off the menu
Press MENU once.
Hint
The album or track currently being played is shaded
in the list.
Notes
Press MENU.
On playback
Albums containing MP3 audio tracks appear.
• Only the MP3 audio tracks displayed in the list can
<TV screen> be played on this player (maximum 100 albums or
200 tracks).
Selected album number
• MP3 audio tracks ar e played in the order displayed
Number of playable albums in
the disc in the list. This may not coincide with the recor ded
order .
1 ( 3 0 )
• The following audio format files cannot be played.
R O C K B E S T H I T – MP3 audio tracks not created accor ding to
K A R A O K E album
ISO9660 Level1/Level2/Joliet.
J A Z Z list
R & B – MP3 audio tracks that do not have the file name
M Y F A V O R I T E S O N G S
C L A S S I C A L extension ".MP3."
S A L S A O F C U B A
– Files with the file name extension ".MP3," but
B O S S A N O V A
are not MP3 audio tracks.
– Audio tracks recor ded in MP3PRO format.
– MP3 audio tracks recor ded in Packet Write
Select an album using V/v, and press
format.
ENTER.
– Data that ar e not MPEG1 Audio Layer 3.
The MP3 audio tracks contained in the album
appears. On the display method
• Only the alphabet and numbers can be displayed.
<TV screen>
Other characters appear as an "*" (asterisk).
Selected track number
• This player cannot display ID3 tags.
Number of playable tracks in the
album
J A Z Z
1 ( 9 0 )
0 1 S H E I S S P E C I A L
track list
0 2 A L L Y O U N E E D I S . . .
0 3 S P I C Y L I F E
0 4 H A P P Y H O U R
0 5 R I V E R S I D E
0 6 5
0 7 T A K E T I M E , T A K E T I M E
Select a track using V/v, and press
ENTER.
Playback starts.
Selecting the audio setup
Item Select
AUDIO ATT • OFF: Standar d setting.
(Audio attenuation) • ON: When the playback sound is distorted.
's menu and the DIGITAL OUT (See "Connecting Other Components" on the Brown
(Adjust only when
Side of this manual for instructions on this
using a coaxial
connection.)
digital cord.)
• OFF: When connecting a TV or an amplifier to
AUDIO OUT L/R.
• ON: When connecting an amplifier with a digital
4 9 8 2 9 9
input jack, etc., to DIGITAL OUT (COAXIAL).
DOLBY DIGITAL (See "Connecting Other Components" on the Brown
(Adjust only when Side for instr uctions on this connection.)
"DIGITAL OUT" is set
• D-PCM: Standar d setting.
to "ON.")
• DOLBY DIGITAL: When connecting to an amplifier
with a built-in Dolby Digital decoder .
MPEG (See "Connecting Other Components" on the Brown
(For European/Asian Side for instr uctions on this connection.)
models only) • PCM: Standar d setting.
(Adjust only when
• MPEG: When connecting to an amplifier with a
"DIGITAL OUT" is set
to "ON.") built-in MPEG audio decoder .
DTS (See "Connecting Other Components" on the Brown
(Adjust only when
Side for instr uctions on this connection.)
"DIGITAL OUT" is set
• OFF: Standar d setting.
to "ON.")
• ON: When connecting to an amplifier with a
built-in DTS decoder .
Hint
The underlined settings are the default settings.