Pco ultraviolet User Manual page 23

Misc
Infotext
Use this command to show or hide the start-up
information dialog box.
Synchronous Scrolling
If this item is checked all opened image windows
will be scrolled at the same time and in the same
manner.
View Embedded Image Info (not available)
Multi Win Picture Order
With the Multi Window you have the ability to view
the images of all active cameras in one window.
You can select between camera order oriented or image time
oriented order. Image time oriented means that the sequence of
images depends on the individual time stamp of each image.
Camera order oriented means that the first image shown is from
camera 1, then camera 2 and so on.
Logfile
This option enables the logging of errors and system info. Enable this
feature in order to create a support file, which can help to find out
troubles with the camera (see A6 )
Load lookup Table (for monochrome cameras)
With the Pseudo LUT (Lookup-Table) feature you can load any LUT
with one of four different formats and you can view the result in the
color view window. Use one of the attached predefined LUTs or
define your own.
Direct Record to File
This command is intended for cameras with internal memory. With
this command you can preset a certain number of images to be
stored. If the camera captures images faster than the computer can
save to disk, then you will lose images. The displaying of the images
doesn't interfere with the record process.
Record with Flowfile
This command should be used to load a flow file. A flow file contains
lines with a delay and an exposure time. Each line corresponds to
one image to be acquired. If the flow file has 15 delay and exposure
times than 15 images will be acquired. Before the image is snapped,
the corresponding time values will be sent to the camera. This affects
the possible image frame rate, as additional time is required for
setting the values between two images. Please see the sample flow
files in the application directory (e.g. flow.txt).
Exit
This command exits the program and closes all channel dialog
windows. Window positions, settings and sizes are stored in the
windows registry and will be loaded again at next start-up.
22
7. CAMWARE FEATURES