Advertisement
∝
h
r1
r2
Movement detection pattern diagram
LRI1668 mounting
The sensor has latching rills on the back so it can
be mounted easily. There are several methods of
mounting available:
• Directly onto the lamp by means of an additional
clip LCA8002 (TL5) or LCA8003 (TL-D).
• Inside the luminaire housing using the additional
clip LCA8007.
To use this clip a hole needs to be cut (punched)
according to the dimensions as indicated in figure 1.
• Directly inside the luminaire housing whereby a
hole needs to be cut (punched) according to figure 2.
71.4 mm
Note: Thickness of xture material: 0.5 ... 2.0 mm
Figure 1: Cutout (punch) pattern when mounting with clip LCA8007
44.9 mm
Note: Thickness of xture material: 0.5 ... 1.2 mm
Figure 2: Cutout (punch) pattern when using direct mounting
Product Guide - LRI1668
∝
h
r1
r2
5
1.8
20
2.7
7
2.7
21
3.3
10
x
x
4.5
13
x
x
5.4
x = no detection
Valid at +20°C
r= 0.5 mm (4x)
r= 3 mm (4x)
∝
28
25
24
23
LRI1668 ActiLume G2 Indus
Sensor H513 N
Luminaire based high bay
multisensor (movement,
daylight, infrared) with visual
movement indicator. To be used
in combination with one of the
controllers from the ActiLume
gen2 family. Color of the product is
white (similar to RAL9016).
LCA8007 mounting clip for
ActiLume G2 Indus Sensor H513
Mounting clip for the ActiLume
G2 Indus Sensor H513
N
the sensor is to be mounted in
the luminaire housing. Color of
the product is white (similar to
RAL9016).
LCA8002 ActiLume sensor clip
for TL5
Clip to be used for ActiLume Multi-
Sensor, ActiLume Luminaire based
extension sensor, ActiLume 1-10V
sensor, ActiLume MicroLuxSense
and ActiLume G2 Indus Sensor
H513 N. With this clip the sensor
can be directly clicked on TL5
lamps.
LCA8003 ActiLume sensor clip
for TL-D
Clip to be used for ActiLume Multi-
Sensor, ActiLume Luminaire based
extension sensor, ActiLume 1-10V
sensor, ActiLume MicroLuxSense
and ActiLume G2 Indus Sensor
H513 N. With this clip the sensor
can be directly clicked on TL-D
lamps.
N
when
3
Advertisement
