Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita BUH550 Instruction Manual

ENGLISH (Original Instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Housing
5. Knob
6. Handle
7. Switch trigger B
8. Switch trigger A
9. Adjusting dial
10. Indicator lamps
11. CHECK button
12. Adapter
13. Hook
14. Tool
15. Belt

SPECIFICATIONS

Model
Blade length
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........ Read instruction manual.
..................... Do not expose to rain.
Intended use
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
8
Explanation of general view
16. Arm cord hook band
17. Holder
18. Extension cord (Battery adapter)
19. Adapter (Battery adapter)
20. Trimming direction
21. Hedge surface to be trimmed
22. Tilt the blades.
23. String
24. Press
25. Chip receiver
26. Nut
27. Shear blade
28. Branch catcher
29. Hooks
30. Fit the hooks into groove
BUH550
-1
) 1,000 - 1,800
1,070 mm
END013-3
ENE014-1
GEA006-2
UH550D
550 mm
1,074 mm
5.1 kg
D.C.36V
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
31. Grooves
32. Press the levers on both sides
33. Unlock the hooks
34. Blade cover
35. Screws
36. Under cover
37. Plate
38. Crank
39. Oval hole of shear blade
40. Limit mark
41. Holder cap cover
42. Screwdriver
43. Brush holder cap
BUH650
650 mm
1,000 - 1,800
1,150 mm
5.2 kg
D.C.36V
UH650D
1,154 mm