Setting Tap And Hold Delay Options - WESTECH S6 User Manual

Appendix
When you tap the assistive shortcut icon, the icon expands slightly and the
assistive menus appear on the icon. Tap the up or down arrow to move to other panels
or swipe upwards or downwards to select other menus.
Using the cursor
On the assistive menu, tap Cursor. You can control the screen using small finger
movements on the touch area. Drag your finger on the touch area to move the cursor.
Also, tap the screen to select items under the cursor.
Use the following options:
• / : Select an item or scroll left or right on the screen.
• / : Scroll up or down the screen.
• : Magnify the area where the cursor is located.
• : Move the touch area to another location.
• : Close the touch area.
To change the cursor settings, open the Apps screen, tap Settings → Accessibility →
Dexterity and interaction → Assistant menu. Then, customise settings in Touchpad
and cursor settings.
Using enhanced assistive menus
Set the device to display enhanced assistive menus for selected apps.
On the Apps screen, tap Settings → Accessibility → Dexterity and interaction →
Assistant menu → Assistant plus, tap the switch to activate it, and then select apps.
Turning on the screen with the air gesture feature
Use the air gesture feature to turn on the screen by moving your hand above the sensor
at the top of the device. You can turn on the screen without pressing a key. When you
use this feature, place the device on a flat surface with the screen facing upwards or
hold the device securely to prevent it from moving.
On the Apps screen, tap Settings → Accessibility → Dexterity and interaction →
Gesture wake up, and then tap the switch to activate it.

Setting tap and hold delay options

Set the recognition time for tapping and holding the screen.
111