Colour Adjustment; Setting Flash Notification - WESTECH S6 User Manual

Appendix

Colour adjustment

Adjust how colours are displayed on the screen if you have difficulty in distinguishing
colours. The device changes the colours into more recognisable colours.
On the Apps screen, tap Settings → Accessibility → Vision → Colour adjustment, and
then tap the switch to activate it. Follow the on-screen instructions to complete the
colour adjustment procedure.
Hearing
Sound detectors
Set the device to vibrate when it detects your doorbell or a baby crying.
Baby crying detector
On the Apps screen, tap Settings → Accessibility → Hearing → Sound detectors, and
then tap the Baby crying detector switch to activate it. The device will vibrate when it
detects sound and the alert will be saved as a log.
1
On the Apps screen, tap Settings → Accessibility → Hearing → Sound detectors,
and then tap the Doorbell detector switch to activate it.
recording of your doorbell.
The device will detect and record the doorbell.
3
Tap and ring your doorbell to check if it is recorded correctly. When the device
detects the doorbell sound, tap OK.
To change the doorbell sound, tap Change doorbell sound.
The device will vibrate when it detects sound and the alert will be saved as a log.

Setting flash notification

Set the flash to blink when you have incoming calls, new messages, or notifications.
On the Apps screen, tap Settings → Accessibility → Hearing, and then tap the Flash
notification switch to activate it.
Doorbell detector
2
Tap
108
to make a