Power Saving Mode; Ultra Power Saving Mode; Turning The Device On And Off - WESTECH S6 User Manual

Basics
• Deactivate the Bluetooth feature when not in use.
• Deactivate the Wi-Fi feature when not in use.
• Deactivate auto-syncing of apps.
• Decrease the backlight time.
• Decrease the screen brightness.

Power saving mode

Save the battery power by limiting the device's functions.
On the Home screen, tap Apps → Settings → Battery → Power saving mode, and then
tap the switch to activate it.
To automatically activate power saving mode when the remaining battery power
reaches the preset level, tap Start power saving and select an option.

Ultra power saving mode

Use this mode to extend the device's battery power. In ultra power saving mode, the
device performs the following:
• Displays colours on the screen as grey tones.
• Restricts the available apps to essential and selected apps only.
• Deactivates the mobile data connection when the screen turns off.
• Deactivates the Wi-Fi and Bluetooth features.
On the Home screen, tap Apps → Settings → Battery → Ultra power saving mode, and
then tap the switch to activate it.
To deactivate ultra power saving mode, tap MORE → Disable ultra power saving mode.
The usage time left shows the time remaining before the battery power runs
out. Usage time left may vary depending on your device settings and
operating conditions.

Turning the device on and off

Press and hold the Power key for a few seconds to turn on the device.
When you turn on your device for the first time or after performing a data reset, follow
the onscreen instructions to set up your device.
To turn off the device, press and hold the Power key, and then tap Power off.
11