Table of Contents
Advertisement
156
About the LCD Panel Display for AF360FGZ
The AF360FGZ will automatically convert the field angle differential
between 35 mm format and the F depending on the focal length
of the lens you are using (when using DA, D FA, FA J, FA or F lenses).
The conversion indicator appears and the format size indicator disappears
when the exposure metering timer of the F is on (it returns to 35
mm format display when the exposure metering timer is turned off).
Lens focal length
AF360FGZ
LCD panel
5
Using P-TTL Auto Mode
Use this flash mode with the AF360FGZ flash unit. When flash mode is set
to "P-TTL auto", the flash pre-fires right before taking pictures using 16-
segment metering and allows more precise control. P-TTL auto is
available in wireless flash mode when two or more AF360FGZ units are
used.
1 Remove the cover of the hot shoe and attach the AF360FGZ.
2 Turn on the AF360FGZ.
3 Set the AF360FGZ flash mode to P-TTL auto.
4 Confirm that the AF360FGZ is fully charged and then take the picture.
• P-TTL auto is only available with the AF360FGZ flash unit.
• The b will light in the viewfinder when the flash is ready (fully charged).
• For details such as operation method and effective distance, please read the
external flash manual.
• The flash does not discharge when the subject is bright enough when Flash
Mode is B or C. Therefore, it may not suitable for daylight-sync shooting.
• Never press the flash pop up button when any external flash unit is attached
to the camera. The built-in flash will hit the external flash. If you want to use
both at once, see p.159 for the connection method.
85mm 77mm 50mm 35mm 28mm 24mm 20mm 18mm
Exposure
metering timer
85mm
Off
Exposure
metering timer
58mm
On
70mm 50mm
35mm
48mm 34mm
24mm
28mm 24mm
*
19mm 16mm
*
* Using wide adaptor
Advertisement
Table of Contents
