Selecting Flash Mode - Pentax DS2 Operating Manual

50

Selecting Flash Mode

1
Press the { button.
The Fn menu appears.
3
2
Press the four-way controller
(3).
The flash options screen appears.
When the mode dial is set to e, b, c,
a or p, B and C appear gray and
cannot be selected.
3
Use the four-way controller
(45) to choose a flash mode.
4
Press the 4 button twice.
The camera is ready to take a picture.
Using Auto Discharge B , C (Automatic Flash Popup)
1
Set the mode dial to I, U, =, q, or ..
2
Press the shutter release
button halfway.
The built-in flash pops up if necessary
and begins charging. When the flash is
fully charged, b appears in the LCD
panel and viewfinder. (p.17, p.20, p.22)
Fn
Flash Mode Flash Mode Flash Mode
Auto discharge Auto discharge Auto discharge
AUTO AUTO AUTO
Exit Exit Exit
OK
OK OK OK
OK