Download Print this page

Disassembly Procedure - Acer CE-6430 Service Manual

Hide thumbs


Disassembly Procedure

Please follow the steps below to perform the disassemble procedure:
1. Remove all the screws at the camera housing.
Tools needed: Screwdriver
2. Remove the back cover after plug off the FPC connection from MCU board.
Tools needed: Tweezers
3. Remove the screws marked in red to remove back cover.
Tools needed: Tweezers, Screwdriver
Image 1
Image 2
Image 3
Chapter 3



  Related Manuals for Acer CE-6430