Acer CE-6430 Service Manual page 22

Display and Noise when
Image playback the
system record/ no sound
Communica USB connecting
tion system failure
TV no images
This document cannot be modified and implemented without prior approval
from Premier.
17
1>. Check the F/W version, update F/W again;
2>. Playback the record to confirm if it is ok, in order
to eliminate the speaker circuit's issue;
3>. Check if the Microphone unit is ok and connects
well;
4>. Check if the MIC record part's circuit has no
wrong parts and is soldered well;
5>. Check if the TV connector is soldered well (play
with TV).
1>. Check if USB connector is cold soldered or miss
soldered;
2>. Check if USB connector is OK;
3>. Check if Y1 crystal frequency of MCU/B is
12MHz;
4>. Check the F/W version, update F/W again;
5>. Check the USB_DET signal on MCU board is
normal.
1>. Check if TV connector is ok, the AV_DET signal
on MCU board is normal;
2>. Check if Y1 crystal frequency of MCU/B is
12MHz;
3>. Check the F/W version, and update F/W again.
Chapter 4