Panasonic CF-72 Series Reference Manual page 40

CD Drive
Information for the DVD-ROM Drive
Refer to the included "WinDVD™2000".
DVDs cannot be played using WinDVD
while the computer is on. To use WinDVD
the computer is off.
The region code has been set to the following:
<For U.S.A. and Canada> Set to "1"
<For Europe>
Use of another region code or alteration of the region code invalidates the warranty.
For more information, contact Panasonic Technical Support.
If commercially available DVD playback software asks you the region code, set to
the following:
<For U.S.A. and Canada> Set to "1"
<For Europe>
Power-saving Mode
If the DVD-ROM drive has not been accessed within 90 seconds, the drive motor will
automatically shut down to reduce the power consumption. When the DVD-ROM drive
is accessed once again, the power of the drive motor is turned on. However, approxi-
mately 30 seconds are required until data is actually read from the disc.
TM
2000 if the DVD-ROM drive is installed
TM
2000, install the DVD-ROM drive while
Set to "2"
Set to "2"
40