Multimedia Pocket - Panasonic CF-72 Series Reference Manual

Multimedia Pocket

You may use any of the following devices.
Floppy disk drive
CD-ROM drive
DVD-ROM drive
CD-R/RW drive
DVD-ROM & CD-R/RW drive
Second battery pack
Attach the battery pack (CF-VZSU14 or CF-VZSU25) to a second battery pack adap-
tor (CF-VAB721).
Second hard disk drive
Confirm the latest information on optional products in catalogs, etc.
NOTE
Be sure to read the Operating Instructions of the devices.
Before connecting a peripheral such as a USB device or a PC Card, change the
multimedia pocket device in accordance with the media in which the driver of the
peripheral exists. Once a screen to install a driver is displayed, the multimedia
pocket device cannot be recognized even if it is properly installed.
Preparation for Installing/Removing
CAUTION
In the standby or hibernation mode, do not install/remove the multimedia pocket device.
Windows 98 When the BaySwap function is being utilized, a device can be installed/
removed into/from the multimedia pocket without turning off the computer.
When the multimedia pocket device has been removed or installed
after the computer is turned off, these steps are not necessary.
When
select [OK].
With the left button of the touch pad or mouse, select
taskbar and then select [Change device in Swappable Bay].
The screen at left is displayed, and the device can be removed/
replaced safely. Do not select [OK] until the completion of the re-
moval/replacement of the device.
NOTE
When the [BaySwap] screen is being displayed, it is not pos-
sible to enter the standby or hibernation mode.
Confirm that the MP
is not lit.
Perform the
Windows 2000 Follow the procedure below only in the case of removal (except for the
second battery pack).
When the multimedia pocket device has been removed after the com-
puter is turned off, these steps are not necessary.
Insertion is carried out with the power on.
Select
Select the multimedia device and then select [Stop].
Follow the on-screen instructions.
Confirm that the MP
is not lit.
Windows NT Power off your computer (
Do not shut down using the hibernation function.
is accidentally clicked and [BaySwap] screen is displayed,
indicator on the side of the multimedia pocket
step1 and 2 of "Installing/Removing". (
on the taskbar.
indicator on the side of the multimedia pocket
"Starting Up/Shutting Down")
35
on the
page 36)