Panasonic CF-72 Series Reference Manual page 36

Multimedia Pocket
MP Release Latch
Insert the device with the la-
bel side facing up.
Installing/Removing
1
Removing the device
Slide the MP release latch. The device will eject slightly.
Remove the device by holding both sides of the device.
CAUTION
Handle the device as shown (holding
both sides). Otherwise, the device may
be damaged. Also, do not apply ex-
cessive downward force on the device.
The projections at the bottom of a de-
vice become deformed.
Be sure the shape of the lock at the
bottom of a device does not become
deformed. Do not insert a device that
has become deformed into the multi-
media pocket. The device may become
impossible to remove later.
Installing the device
Gently insert the device into the multimedia pocket by pushing on
both corners until it clicks into place.
CAUTION
Do not install the device upside-down.
The bottom of the drive may become disfigured.
2
Windows 98
Select [OK] on the [BaySwap] screen
NOTE
Whether the device is properly recognized or not can be confirmed in
[Main] of the Setup Utility. If the device is not recognized (or if a CD/
DVD cannot be read or an FD/HDD/CD-R/CD-RW cannot be read or
written to), power off the computer and reinstall the device.
Windows 98
If is clicked with the right button, although [Change Drive Pass-
word] is displayed it cannot be selected.
36
Projections
Lock