Menu
IteM
Rear feed
Continuous paper
menu
top of form
Bottom feed
Line Spacing
menu
Skip Over
Perforation
Page Length
ML1120 Plus/ML1190 Plus User's Guide - Operating instructions > 59
FunctIon
Select the reference
position for the TOF
position when auto loading
continuous form paper
from the rear of the printer.
(Up to the mid-section of
characters in the first line.)
Select line feed pitch.
Select whether to skip over
perforation or not. (When a
skip over perforation setup
command is received,
the received command is
given priority.)
Select the length of a
continuous form.
SettIng
2.12 mm (1/12 )
4.23 mm (1/6 )
6.35 mm (1/4 )
8.47 mm (1/3 )
10.58 mm (5/12 )
12.70 mm (1/2 )
14.82 mm (7/12 )
16.93 mm (2/3 )
19.05 mm (3/4 )
21.17 mm (5/6 )
23.28 mm (11/12 )
25.40 mm (1 )
27.52 mm (13/12 )
Use top of form
6 LPI
8 LPI
25.4 mm(1 )
no
279.4 mm(11 )
296.3 mm(11 2/3 )
304.8 mm (12 )
355.6 mm(14 )
431.8 mm(17 )
76.2 mm(3 )
82.6 mm(3.25 )
84.7 mm(10/3 )
88.9 mm(3.5 )
93.1 mm(11/3 )
101.6 mm(4 )
127.0 mm(5 )
139.7 mm(5.5 )
152.4 mm(6 )
177.8 mm(7 )
203.2 mm(8 )
215.9 mm(8.5 )