How To Use I-Add - Midea MFW-V1100DDi Owner's Manual

How to use I-Add

I-ADD is a Auto dosing system, it will take right amount of detergent and softener.
You can also press the Detergent button to add more or less detergent according to the
soil level. (I-ADD only apply to liquid detergent, softener. Don't add powder into the
I-ADD boxes. )
Kind tips
1 First time use, the amount of auto-dosing maybe not sufficient.
2 It will be frozen when the temperature below 0 ℃.
3 Please add detergent and softener liquid when the ADD lights alarm.
How to clean the I-Add box
The detergent and softener box may get stuck,(long-time no use)
You should clean the I-Add box:
1 Flush warm water into the box.
2 Press the power button to turn power on.
3 Press both the"option"and "wash speed".
4 Press "detergent" and "softener"to pump out the liquid.
5 Run a complete cycle of "Drum clean"to clean the drum.
Don't use high foam detergent. Read the specific instructions on how to use the detergent.
DO NOT EXCEED STATED DOSE, OVER
foam, will overflow from the unit, and will spend more time for rinsing. Washing powder may
gather and block the box, please pay attention to Clean.
Liquid detergent storage box.
Open the lid, Add the liquid
detergent into the Liguid
Storage box slowly.
Add Laundry powder in this box.
This box not used for auto-dosing.
DO NOT EXCEED STATED DOSE, OVER
. Excessive detergent will cause too much
Fabric softener storage box.
Open the lid, Add the softener into
the Softener Storage box slowly.
.
15
Cleaning and Maintenance of the washing machine
Cleaning of water inlet hose joint
Unscrew and remove the water inlet hose joint from the washer and clean the filtering
screen of inlet valve with brush.
NOTICE
! Make sure to pull out the power plug before the cleaning and maintenance.
! Please keep the washer with neat appearance and perform correct
！
maintenance to prolong the service life of washer.
Cleaning of filtering bag
The special circulation water flow is designed for this washer, thus the flock powder
and flock residues will be automatically collected into the filtering bag. After application,
the user shall regularly clean the filtering bag to remove the flock powder and flock residues.
Detail operation methods are following:
Press it according to the arrowhead
point . And you can discharge the
frame of filtering bag.
Jack
Put the frame of filtering bag into the
two jacks and push into emphatically
as shown in figure above.
16