Instruction Of The Washer Operation Panel - Midea MFW-V1100DDi Owner's Manual

Instruction of the washer operation panel

DELAY BUTTON
OPTION BUTTON
Before start, Continuous press the
option button, You can choose Memory,
Less Tangling, Drum Clean and Air Dry
procedures.
PROGRAM BUTTON
Start default to the standard procedure,
Before start, press the procedure button,
You can choose any procedures which
you want.
WASH RINSE SPIN BUTTON
After choosing the washing procedure,
washing time, rinsing times and spin time
also have default values, You can choose
any parameters according to your
requirement.
WASH LEVEL BUTTON
After Program Selection,
Press the wash level button
to Select the proper water
level for wash.
After user press the start/pause button to
start, you can also press the delay and wash
button in the same time to start the children-
lock function, if you want to clear this function,
you just need to press the delay and wash
button in the same time again, remark: the
function of the child-lock is effective only after
the procedure was start.
9
WASH SPEED/SPIN SPEED BUTTON
By pressing this button you could
select wash or spin speed.
RINSE LEVEL BUTTON
The rinsing water level button is alternative
for users, changing the water level for rinsing,
The corresponding pilot lamp is on when
you choose which water level, The default
rinsing water level is one gear higher than
washing level except the highest water level.
START PAUSE BUTTON
After program selection, press the
button to start wash cycle.
Press this button to pause and resume
the wash cycle.
POWER BUTTON
SOFTENER BUTTON
Press the Softener button, the
auto dosing system will take
right amount of softener, At the
last rinse tme.
DETERGENT BUTTON
Press the Detergent button, The auto
dosing system will take right amount of
detergent.
You can also press the Detergent button
to add more or less detergent according
to the soil level
10