Saving Energy, Cold Wash; Saving Time, Turbo Wash; Setting Options During The Cycle; Button Lock Feature, Child Lock - LG WM4270H*A Owner's Manual

WARNING
y Do not touch the door during steam cycles.
The door surface can become very hot. Allow
the door lock to release before opening the
door.
y Do not attempt to override the door lock
mechanism or reach into the washer during
a steam cycle. Steam can cause severe
burns.
NOTE
y The steam option cannot be used with all
cycles.
y Steam may not be clearly visible during
the steam cycles. This is normal. Too much
steam could damage clothing.
y Do not use steam with delicate fabrics such
as wool, silk, or easily discolored fabrics.
Saving energy, Cold Wash™
Adding the Cold Wash™ option reduces
energy usage and provides the same washing
performance as a warm water wash.
By using six different washing motions (Tumbling,
Rolling, Stepping, Scrubbing, Swing, Filtration),
fabrics get the cleaning benefits, without the
energy usage.
B
1
Press A and turn
cycle.
2
Press . The washer will automatically
adjust the cycle settings.
3 Set any other desired options.
4 C
Press .
NOTE
y When you select the Cold Wash™ option,
wash time will be increased up to 10
minutes.
y For high wash efficiency, use this option
with less than 8 pounds (3.6 kg) of laundry
(approximately 8 thick towels).
to select the desired
USING YOUR WASHING MACHINE
Saving time, Turbo Wash™
Adding the TurboWash™ option reduces cycle
time and provides good performance in normal
cycle.
By using the TurboWash™, We can save the time
without sacrificing performance.
B
1 A
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
4 Press C .
NOTE
y The Turbo Wash option cannot be used with
all cycles.
y Turbo Wash is available in the beginning of
the Cotton/Normal, Heavy Duty and Perm.
Press cycles.

Setting options during the cycle

You can add desired options during the wash
cycle.
Button lock feature,
You can lock the washing machine to prevent
children or others from changing the cycle
settings by pressing the buttons during the cycle.
To enable child lock
Press and hold
the wash cycle.
- When the Child Lock is enabled, a N message
and the remaining wash time are displayed,
in turn, on the display panel of the washing
machine.
To disable child lock
(When the Child Lock is activated.)
Press and hold
the wash cycle.
NOTE
y Child Lock remains active after the cycle
ends. To cancel Child Lock, turn the washer
on and then press and hold the PreWash
button for three seconds.
to the desired cycle.
Child Lock
for three seconds during
for three seconds during
27