Adding Extra Rinse Cycle, Extra Rinse; Presetting The Start Time, Delay Wash; Efficiency Cleaning, Steam; Saving Energy, Cold Wash - LG WD4370HVA Owner's Manual

Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse
cycle.
B
1 A
Press and turn
2
Press .
- light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 C
Press .
Presetting the start time,
You can set the desired start time.
B
1 A
Press and turn
2
Press the desired option to use the other options.
3
Press repeatedly to select the desired start
time.
- light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
4 C
Press .
Efficiency cleaning,
Adding the Steam option to these cycles provides
superior cleaning performance while reducing
energy and water consumption.
By using a hot steam fabrics get the cleaning benefits
of a super hot wash, without the energy usage or
potential damage to fabrics.
B
1 A
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
4 C
Press .
WARNING
y Do not touch the door during steam cycles. The
door surface can become very hot. Allow the
door lock to release before opening the door.
y Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
EXTRA RINSE
to the desired cycle.
DELAY WASH
to the desired cycle.
STEAM
to the desired cycle.
USING YOUR WASHING MACHINE
NOTE
y The steam option cannot be used with all cycles.
y Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
Saving energy, COLD WASH ™
Adding the COLD WASH™ option reduces energy
usage and provides the same washing performance
as a warm water wash.
By using 6 different washing motion (Tumbling,
Rolling, Stepping, Scrubbing, Swing, Filtration),
fabrics get the cleaning benefits, without the energy
usage.
B
1 A
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
4 C
Press .
NOTE
When you select the COLD WASH™ option,
y
wash time will be increased up to 10 minutes.
y For high wash efficiency, it is recommended to
use less than 8 pounds (3.6kg).
Saving time, TURBOWASH™
Adding the TurboWash™ option reduces cycle time
and provides good performance in normal cycle.
By using the TurboWash™, We can save the time
without sacrificing performance.
B
1 A
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
4 C
Press
.
to the desired cycle.
to the desired cycle.
27