CONVENTIONAL COOKTOP
IGNITION SYSTEM
PILOT IGNITION
PILOTLESS IGNITION
Your cooktop is equipped with either pi-
When the cooktop is first installed, the
lot ignition (using a pilot flame to light the
pilots may bedifficult to lightdue to air in
burner) or pilotless ignition (using a
the gas line. To bleed off air from the
sparkfromanignitortolighttheburner),
line, hold a lighted match next to the
_heLITE
burner and turn knob on. When the
.......................................................................
burner lights, turn the knob off and pro-
_
ttii_ _
to _
Besure all surfacecontrolsare set in the
eeed as directed below.
OFF position prior to supplying gas to
_tO__i
_ _
_ _
_
t_
the appliance.
To light pilot: Remove or raise and
(_positi_
support cooktop on metal rod, if
equipped. Hold lighted match near the
pilot ports.
TO OPERATE SURFACE BURNER
WITH PILOTLESS IGNITION DURING
A POWER FAILURE:
_
_
1. Besureallcontrols are intheeFF po-
sition.
2. Hold a lighted match to the desired
surface burner head.
3. Turn knob to LITE. The burner will
then light.
4. Adjust the flame to the desired level.
,-4-
Need help?
Do you have a question about the 82JN-2K and is the answer not in the manual?