Parameter
Anti-dither
Record
Record Delay
Relay out
Alarm delay
Send Email
Snapshot
Abnormity (except WV-V1330LK)
6.4.4
Abnormity includes No SD Card, SD Card Error and Capacity Warning.
Note:
Device without SD card function does not have the above three statuses.
See Figure 6-38 to Figure 6-40.
Function
System only memorizes one event during the anti-dither period.
The value ranges from 0s to 100s.
System auto activates motion detection channel to record once
alarm occurs (working with motion detection function).
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Enable alarm activation function. You need to select alarm output
port so that system can activate corresponding alarm device when
alarm occurs.
System can delay the alarm output for specified time after alarm
ended. The value ranges from 10s to 300s.
After this function is enabled, system can send out email to alert
you when alarm occurs and ends.
After you enabled snapshot, the system will automatically
snapshot if alarm occurs.
Figure 6-38
65