Connections To Other Equipment - Hitachi LE40S508 Owner's Manual

Connections to other equipment
To connect the TV to a HDMI or a DVl device to the TV
The HDMI/DVI input receives digital audio and video from an HDMI device or digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal. Separate analog audio cables are
needed for audio when using a DVI source device.
Left of the TV
To AUDIO IN
HDMI cable To HDMI output I
c_'_ (_ed) I
To HDMI/DVI IN
(not supplied) To DVI output
L Audio cable (not supplied)
NOTE:
, HDMI input audio does not support DTS audio.
HDMI device
or
DVI device
I
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC'S RESOLUTION AND REFRESH
RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video terminal of the computer and the other end to the PC IN on the rear of the
TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cable to the audio
output of your Multimedia computer and to the PC Audio IN on the rear of the TV.You can also connect the PC with HDMI cable. If you
use HDMI cable, you don't have to connect the audio cable. If you use DVI-to-HDMI cable, please connect audio cable as same way as
VGA cable.
Press INPUT on the remote control to select PC input.
Switch on the computer. The TV can operate as the computer monitor.
Bottom of the TV
To PC IN
PC
_To PC AUDIOIN 1" 1
Audio cable {not supplied) I
VGA cable (not supplied)
Monitor Display modes
Mode Resolution Refresh rate
VGA 640x480 60/75 Hz
VGA 720x400 70Hz
SVGA 800x600 60/75 Hz
XGA 1024x768 60/70/75 Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
SXGA 1280x1024 60Hz
WXGA+ 1440x900 60Hz
WSXGA+ 1680x1050 60Hz
FHD 1920x1080 60Hz
NOTE:
, The on-screen displays will have a different appearance in PC mode than in TV mode.
, If there is no video signal from the PC when the unit is in PC mode, "VVeakor No Signal" will appear on the TV-screen.
• When the PC's resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal, which has been confirmed
operational on this TV, may appear depending on the PC used. In this case, "Auto Adjust" or other position adjustment functions may
fail to correct the image position. To solve this problem, change the PC settings to select another resolution.