Hitachi LE40S508 Owner's Manual page 17

Convenience functions
Setup
Menu Language
English / Frangais / Espa_ol
Preferred Audio Language
English / Frangais / Espa_ol
Closed Captions
Reset
No / Yes
Setu _Wizard
Demo Mode
On / Off
Health Remid
On / Off
You can choose from three different languages (English, Frangais (French) and
Espafiol (Spanish)) for the on-screen displays.
Select the language you prefer first, then proceed with the other menu options.
When two or more audio languages are included in a digital signal, you can select
one of the audio languages. (This function is available only for digital broadcasts.)
See page 21.
Restore Video, Audio (except "Audio Language"), Time (Sleep Timer, Time Format
and Auto Sleep only) and Setup (except "Menu Language") settings to the default
factory settings.
See page 13.
Turn the demo mode On or Off.
A TV feature introduction will be popped up at the top of the screen.
Switch the Health Remind On or Off.
While Health Remind is set to On, a prompt picture will remind you to have a break at
intervals of two hours.
HDMI - CEC
CEC Enable Select "On" to enable CEC features.
Device Auto Off When the user turns off the TV, all active CEC enabled devices on the HDMI input
will go to Standby.
TV Auto On Pushing the "Play" button on the CEC enabled device will command the device to play
, turn theTV on, and the HDMI input, that the device is connected to, will become the
active input device for the TV.
ARC To enable the audio through an AV receiver using HDMI (ARC).
Device Lists Display devices that are connected to TV.
Connect To make a connection to a device shown on the device list.
Root Menu To access the device menu.
SW Version
Time
Clock
Auto Clock
On / Off
Year
Month
Date
Hour
Minute
Daylight Savings
On / Off / Auto
Slee 3Timer
0ff/10/20/30/60/90/
120 / 180 / 240 min
Auto TV off
Off/1/2/3/4 Hours
Time Zone
Time Format
I 12-hour / 24-hour
The Auto Clock function will automatically set the built-in clock (Year, Month, Day and
Time) when the TV is connected to an antenna or cable TV system and it is turned off.
As theTV searches for a receivable station in your area and it receives a broadcast
signal for Auto Clock, the Auto Clock needs several minutes to set itself.
Use the A/T/,,t/_- buttons to set theYear, Month, Day and Time
, Available only when you set "Auto Clock" to "Off".
If you want to activate Daylight Saving Time, select "On".
Sleep Timer switches the TV to standby after a defined period of time.
To cancel the Sleep Timer, set to "Off".
The TV will automatically switch to standby when there is no remote control or control
panel key operation for the set amount of time.
Select your local time zone for auto clock feature.
You can select Newfoundland, Atlantic, Eastern, Central, Mountain, Pacific, Alaska,
Hawaii and Samoa.
Select the time format.