Step 8 Put the capstan belt B on the motor ass'y pulley.
Step 9 Install the sub chassis to the mechanism, and then
tighten screws.
Step 10 Remove 3 screws.
Step 11 Put the capstan belt B as shown below.
Step 12 Put the capstan belt A on the motor ass'y pulley.
10.15 Replacement for the cassette lid ass'y
·
Follow the (Step 1) - (Step 2) of Item 10.3 -
Disassembly of Top Cabinet
Step 1 Force the lever upward, open the cassette lid ass'y.
(For DECK1 and DECK2)
Step 2 Lift up the cassette lid ass'y in the direction of arrow.
(For DECK1 and DECK2).
34