Panasonic SC-TM23 Service Manual page 29

Step 7 Move the slide plate 1 to forward fully.
Step 8 Install the rear lock. (The claw should be latched.)
Step 9 Install the Spindle Position P.C.B.. (The claw should be
latched.)
Step 10 Install the tray lock. (The claw should be latched.)
Step 11 Remove the tray lock spring from hook,and then
latch to the tray lock.
Step 12 Install the UP/DOWN gear, change gear, change
gear spring, pulley gear and belt in the order of (1) - (5).
29