Sample Analysis - RADIOMETER ABL 77 Series Service Manual

Chapter 2: Analyzer Description

Sample Analysis

Introduction The Analysis option on the Main Menu allows the user to initiate a sample
analysis.
Analysis – initial Pressing the Analysis icon initiates a brief flush of Cal1 solution to ensure the tip
flush of the inlet probe is filled with fluid.
• To begin the sample analysis, the inlet probe flap is lifted to the syringe or
Analysis – phase
1 aspiration
capillary position.
• The Aspirate button is then pressed.
• The primary sample pump then draws in 70 microLiters of sample (see
Figure 2-3).
2-12
Figure 2-3
ABL77 Service Manual
Continued on next page
Rev. F