Pc Monitor Mode; Connecting A Pc - Grundig GR16-100 User Manual

SETUp
AUToCoNFIGURATIoN
HoRIzoNTAL poS.
vERTICAL poS.
pHASE
CLoCk
SELECT BACk
MENU
PC MONITOR MODE
Connecting a PC
1 Connect the socket »PC-IN« on the television to the corre-
sponding socket on the PC using a VGA cable.
2 Connect the socket »PC Audio« on the television to the corre-
sponding socket on the PC using a suitable cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, resolution 1280 x
768, frequency 60 Hz).
Selecting the channel position for the
1 Press »
«, select »PC« with »
confirm.
Settings for the
1 Press »M« to open the Main Menu.
– The »MAIN MENU« appears.
2 Select »SETUP« with »
3
Press » « or »
q
» « or » « to adjust their level.
r e
– Channel Settings:
»Autoconfiguration«
»Horizontal pos.«
»Vertical pos.«
»Phase«
»Clock«
4 Press »EXIT« to finish the settings.
« or »
q
PC
« or » « and press »OK« to confirm.
q w
« to select the options in this menu and press
w
For automatic PC configuration;
A djust the picture position hori-
zontally;
A djust the picture position verti-
cally
R emove horizontal lines and
blurring.
S et the cycle frequency;
-----------------------------------------------------------
PC
« and press »OK« to
w
25