Basic Plumbing - Jandy and P8 Installation Manual

Page 8
2.3

Basic Plumbing

2.3.1 Plumbing for Pool and Spa Combination
The following plumbing diagrams illustrate
simplified versions of standard plumbing setups
for a pool and spa that share the same filter pump,
filter, and heater. The intake and return Jandy Valve
Actuators (JVAs) turn si mul ta neous ly so when the
Spa mode is selected on the AquaLink RS PDA,
water circulation switches between pool and spa
(consult the Jandy Valve Actuator Installation and
Operation Manual to ensure that the JVAs are
synchronized and rotate properly). Please consult
the Jandy Valve Plumb ing Manual for further
examples of pool/spa plumbing.
Heat Pump
Heater
Pool Return
From Solar
Check
Valve
Spa
Make-up
Check
Valve
Spa Return
Please note that if you have a pool only or a spa
only, the diagram does not apply.
NOTE When the filter system is shared (a Pool/Spa
Combo), the spa water must be able to overflow
into the pool.
To Solar
Filter
Pool Drain
Skimmers
Filter
Pump
Spa Drain
Skimmers