Controlling The Cash Drawer - Epson TM-T88V Technical Reference Manual

Controlling the Cash Drawer

A pulse output is sent to drawer kick connector pin 2 or pin 5, and you can open the drawer.
You can also check the open/close status of the drawer by checking the signal level of the drawer
kick connector pin 3.
These controls are executed by a driver or by commands.
ESC/POS Commands
Prepare the output command for the specified pulse and the status transmission command.
For details, see the ESC/POS Command Reference.
For Windows Printer Drivers (APD)
You can set so that the drawer opens at the start/end of printing or start/end of a page. For
details, see the manual for drivers.
For details on control, see the manual for Status API of the driver.
OPOS (OCX Driver)
Register a cash drawer using the SetupPOS Utility, and control using the OpenDrawer method
or the DirectIO function.
For details, see the "EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE
Cash Drawer" and the "UnifiedPOS Specification".
OPOS for .NET
Register a cash drawer using the SetupPOS Utility, and control using the OpenDrawer method
or the DirectIO function.
For details, see the "EPSON OPOS ADK for .NET MANUAL Application Development Guide
Cash Drawer (EPSON Standard)" and the "UnifiedPOS Specification".
ePOS-Print SDK
The output command for the drawer kick pulse and the status transmission command are
provided in each SDK library. For details, see the user's manuals provided with each SDK.
• Whether or not pin 2 or pin 5 operates the drawer kick connector depends on the con-
• You can acquire documents regarding the UnifiedPOS from the following link.
76
nected cash drawer.
https://nrf.com/resources/retail-technology-standards/unifiedpos