Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. TM-T88V
  6. Manual

Epson TM-T88V Manual

Hide thumbs Also See for TM-T88V:
1
2
3
4

Advertisement

Quick Links

Download this manual
This guide presents contents related to Bluetooth Interface unit and important information
intended to ensure safe and effective use of this product. Read this guide carefully and store
it in an accessible location.
EMC Standards Applied
Product Name: IBT I/F Circuit Board
Model Name:
The following standards are applied only to the interface boards that are so labeled. (EMC is
tested using the EPSON power supplies and TM-T88V.)
Europe:
North America: EMI: FCC/CAN ICES-3 (A)/NMB-3 (A)
WARNING
You are cautioned that changes or modifications not expressly approved by Seiko Epson
Corporation could void your authority to operate the equipment.
CE Marking
DECLARATION of CONFORMITY
According to ISO/IEC Guide 22 and EN 45014
Manufacturer:
Address:3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 JAPAN
Representative:
Address:
Declares that the Product: Product Name: Interface Board
Conforms to the following Directives and Norms
R&TTE:
The printers in which this board is installed do not conform to the following:
Directive 90/384/EEC EN45501
USA
NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
Bluetooth
M315A
CE marking
SEIKO EPSON CORPORATION
EPSON FRANCE S.A.
Parc Technologique Europarc 60, Rue Auguste
Perret 94043 Creteil Cedex France
Model Name: M315A
Commercial Name: IBT I/F Circuit Board
Directive 1999/5/EC
EN 300 328
EN 301 489-1
EN 301 489-17
EN 60950-1
EN 62311
Copyright © 2013 by Seiko Epson Corporation
®
Interface Model
1
Printed in China

Advertisement

loading

Related Manuals for Epson TM-T88V

Summary of Contents for Epson TM-T88V

  • Page 1 Europe: CE marking North America: EMI: FCC/CAN ICES-3 (A)/NMB-3 (A) WARNING You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. CE Marking DECLARATION of CONFORMITY According to ISO/IEC Guide 22 and EN 45014...
  • Page 2 Europe Hereby, Seiko Epson Corporation declares that this M315A is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Italy In Italy, if used outside of own premises, general authorization is required.
  • Page 3 Notes on Usage Timing of cutting off connection If data transfer from an application of the host has already been completed, data might remain in the printer internal buffer. As such data remaining in the buffer might be lost when the connection is cut off, use the status and similar functions to check that transmitted data has been completely printed when printing or cutting off the wireless connection.
  • Page 4 Press the Push button. Press the Push button again. (Keep pressing the button until the printer starts printing.) Initialize wireless communication settings is complete. ❏ Setting to automatically reestablish the connection Install the roll paper. Close the roll paper cover. While pressing the Push button on the interface board, turn on the printer.