Accelerator Pedal - Coleman OUTFITTER 700-L Owner's Manual

NOTE:
 When the switch is set to ―LOCK‖, the
differential gear
indicator light
differential gear is locked.
 When the indicator and indicator light are
flashing, turning the steering wheel back
and forth will help the differential gear
lock to engage.
 Riding before the differential gear lock is
properly engaged (e.g.,when the indica-
tor and indicator light are flashing)will
cause the engine speed to be limited
until engagement is complete.

Accelerator pedal

Press the accelerator pedal down to increa-
lock indicator
will flash until
se engine speed. Spring pressure returns the
pedal to the rest position when released.
and Always check that the accelerator pedal
the returns normally before staring the engine.
1. Accelerator pedal
Before starting the engine, check the accele-
rator pedal to be sure it is operating smoothly.
Make sure the accelerator pedal fully returns
to the idle position as soon as it is released.
Control Functions 4-13