Updating Model Information After Replacing The Fb1 Board - Sony KDL-40XBR4 Service Manual

2-3. UPDATING MODEL INFORMATION
AFTER REPLACING THE FB1 BOARD
Complete the following steps to reset the model information to the
correct size after replacing the FB1 Board.
1. Access the Service Menu by pressing the following buttons on the
Remote Commander within a second:
Channel 5
DISPLAY
The service menu displays.
JUMP
2. Press the button until the BEM micro service menu displays.
BEM
BOOT:
MAIN:
DATA:
3. Press 2 until the 0001 MODEL_INFO category displays.
BEM
0001
0001
DIFF
4. Using the 3 or 6 on the remote commander to increase or decrease
the value, do one of the following:
If model size is 40"
If model size is 46"
5. To write into memory, press MUTING then 0 on the Remote
Commander.
8. To exit service mode, turn the power off.
KDL-40XBR4/40XBR5/46XBR4/46XBR5
Downloaded from www.Manualslib.com
Volume +
SERVICE
0. 026W00AU
0. 050W00AU
0. 049A00LUW
SERVICE
MODEL_INFO
PANEL_SIZE 0
1
Set to 0
Set to 1
manuals search engine
TV POWER .
KDL-40XBR4/40XBR5/46XBR4/46XBR5
23