Panasonic SA-AK570PL Servise Manual page 64

SA-AK570PL / SA-AK570GCP
Step 6 Move the rear panel slightly backward as arrow shown,
lift up the AC Inlet P.C.B. together with the SMPS P.C.B..
Step 7 Position SMPS P.C.B. & AC Inlet P.C.B. according to
the diagram shown.
Step 8 Position Mechanism Unit (CR14C) according to the
diagram shown.
Step 9 Connect 22P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 10 Connect 11P FFC cable at the connector (CN2802) on
Main P.C.B..
Step 11 Connect 6P FFC cable at connector (CN2815) at Main
P.C.B..
Step 12 Connect 20P FFC cable at connector (CN2804) at
Main P.C.B..
Step 13 Connect 5P wire cable at the connector (CN1113) on
USB Connector/Led P.C.B..
Step 14 Attach original cable with extension cable (REXX0683)
(8P cable from H5801 to CN5500).
Step 15 Attach original cable with extension cable (REXX0680)
(11P cable from CN2701 to CN5802).
Step 16 Connect extension cable (REEX0930) (17P cable from
CN5050 to CN5050).
Step 17 Service AC Inlet P.C.B. & SMPS P.C.B. respectively.
64