Panasonic SA-AK570PL Servise Manual page 16

SA-AK570PL / SA-AK570GCP
Item
Mode Name
CD-MP3 Reading To check for the CD-MP3
& Playing Reading setting of the
inspection main unit. The volume
will be automatically set
to its respective level (in
dB). During this mode,
treble/bass/EQ will be set
to '0'dB & OFF.
(For more information,
refer to section 8.2.4)
CD Loading Test To determine the
Mode reliability of CD Loading
Unit.
To check for the
open/close operation for
the CD loading unit. It
fails when there is
abnormality in opening or
closing.
CD Traverse Unit To check for the traverse
Test Mode unit operation. In this
mode, the first & lost
track is access & read
(TOC). It fails when TOC
is not completed by IDS
or the traverse is out of
focus.
CD Combination A combination of CD
Test Mode loading & Traverse unit
test.
7.2.3. Service Mode Table 3
Item
Mode Name
Self Diagnostic Checking the records for
History self-diagnostic.
Micro-P Version Checking of various
Display items and firmware
version.
Note: The micro-
processor version as
shown is an example. It
will be revise when there
is an updates.
FL Display
sequenceDisplay
[
Description
Description
]
FL Display Key Operation
Front Key
In doctor mode:
To exit Doctor Mode, press [
main unit or remote control.
In doctor Mode:
To cancel, press [PROGRAM] button on remote
control.
To exit Doctor Mode, press [
main unit or remote control.
In doctor Mode:
To cancel, press [PROGRAM] button on remote
control.
To exit Doctor Mode, press [
main unit or remote control.
In doctor Mode:
To cancel, press [PROGRAM] button on remote
control.
To exit Doctor Mode, press [
main unit or remote control.
FL Display Key Operation
Front Key
In service mode:
To exit Service Mode, press [
main unit or remote control.
To clear history, press & hold [0] for 5 seconds
or more.
(Display 1) In service mode:
To exit Service Mode, press [
main unit or remote control.
(Display 2)
16
1. Press [5] button on remote control.
1. Press [ ], [1] & [1] button on remote
control.
1. Press [ ], [1] & [2] button on remote
control.
1. Press [ ], [1] & [3] button on remote
control.
1. Press [1] button on remote control.
1. Press [2] button on remote control.
] button on
] button on
] button on
] button on
] button on
] button on