Settings - Toshiba e-STUDIO6540C Management Manual

2 SETTING ITEMS (ADMIN)
802.1X SETTINGS
You can make settings for IEEE 802.1X authentication that will apply to wired networks.
This equipment supports the following authentication methods:
 EAP-MSCHAPv2
 EAP-MD5
 EAP-TLS
*1
 PEAP
The following protocols are available for inner authentication:
- EAP-MSCHAPv2
 EAP-TTLS
The following protocols are available for inner authentication:
- PAP
- CHAP
- EAP-MSCHAPv2
- EAP-MD5
*1 PEAP is not available for Windows Server 2008.
To enable IEEE 802.1X authentication, you must install certificates in this equipment as required, using TopAccess. The
certificates that must be installed are as follows.
Authentication Method
EAP-MSCHAPv2
EAP-MD5
EAP-TLS
PEAP
EAP-TTLS
*1 The CA certificate must be installed in this equipment before the settings for IEEE 802.1X authentication are performed.
*2 The user certificate must be installed in this equipment before the settings for IEEE 802.1X authentication are performed.
 For instructions on how to install certificates, refer to the TopAccess Guide "Chapter 8: [Administration] Tab
Page".
 For instructions on how to display the WIRED 802.1X SETTINGS screen, see the following page:
 P.47 "Accessing the Admin Menu"
122 802.1X SETTINGS
Inner Authentication Method
-
-
-
EAP-MSCHAPv2
PAP
CHAP
EAP-MD5
EAP-MSCHAPv2
CA Certificate User Certificate
-
-
*1
Necessary
*1
Necessary
*1
Necessary
*1
Necessary
*1
Necessary
*1
Necessary
-
-
*2
Necessary
-
-
-
-
-