Nokia 2255 User Manual page 35

3. At the Feature code: prompt, enter the appropriate feature code (5 characters
or less).
You can enter other feature codes, or press the end key to return to the standby
mode. When you enter a network feature code, the feature is visible in the
settings menu.
Call forward
Call forward tells your network to redirect incoming calls to another number. Call
forward is a network service and may not work the same in all networks, so
contact your wireless provider for availability.
1. In the standby mode, select Menu
and one of the following options:
Call forwarding—Diverts all calls to the number you specify.
Forward if busy—Diverts incoming calls when you are in a call.
Forward if not answered—Divert incoming calls to another number if you are
unable to answer. You can set a delay before forwarding takes place.
Cancel all call forwarding—Cancel any call forwarding options you have set.
This option does not require that you perform step 2.
2. Select Activate > OK to enter the number to which calls are forwarded or
Cancel.
Call waiting
If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, decline, or ignore
the incoming call.
1. In the standby mode, select Menu
Activate, Cancel, or Cancel for next call
2. During a call, select Answer, or press the call key to answer the waiting call,
and put the first call on hold.
3. Press the end key to end the active call and the held call.
Send my caller ID
If your wireless service provider supports this feature, you can prevent your
number from appearing on the receiving party caller ID.
In the standby mode, select Menu
with next call and the number you are calling at the prompt. This feature allows
> Settings > Call settings > Call settings
> Settings > Call settings > Call waiting
and enter a number at the prompt.
> Settings > Call settings > Send my caller ID
S e t t i n g s
Call
>
35