Power Source; Paper Loading - DCA Intertel MP2005 User Manual

5.2 Power Source

The MP-2005 requires a power source between:
* 11.0 - 14,0 VDC
* If the voltage drops below 10.5 VDC
( batteries drained ) the printer stops.
CONTROLPANEL
DCA Intertel
DCA Intertel
ONLINE
Paper End
ERROR
DCA Intertel
16

5.3 Paper Loading

MP-2005 can print on UNI A4/A5 size single sheet paper
forms or multi part paper forms or continuous fan-fold
paper with hole to hole spacing of 227mm (8.94").
The procedure for correct paper loading is the following:
● Set the printer OFF LINE
● Open the printer by lifting lever A (Fig. 2.)
● Insert single-sheet module by placing it over the
printing plate, while checking if it is equally spaced
with respect to the printing area; in case of
continuous fan-fold paper, be sure that the
sprockets engage correctly in the holes provided for
near the edges.(see photo A,B and C)
Photo A
● Close the swiveling printer top.(see photo D)
● Switch the printer ON LINE again.
DCA Intertel
V1.1 V1.1
Front side
Photo C
Photo B
Left side
Photo D
DCA Intertel
17
V1.1