Advertisement
AMPLIFIER FEATUER DESCRIPTIONS
MAXPZ760NjMAXPZ960N Z CHANNEL AMPLIFIERS
The
X-OVER
slide switch selects the intermal crossover functions:
- The input signal is routed directiy
to
the
LINE OUT
RCA jacks, regardless of the
X-OVER
setting simplilYing daisy chaining of amplifiers.
- HP:
Selects the built in
HIGH PASS
filter, variable from 40 Hz to 2KHz.
- FLAT: Bypasses all crossovers for full frequency range operation.
LP:
Selects the built in
LOW PASS
filer, variable ITom 30 Hz to 150Hz.
Note that the LOW PASS signal is
MONO
- In the
LP
position, the
HIGH PASS
filter acts as a subsonic filter.
When the
LP
mode is selected, a 0 to
+
I 0 dB, at 45 Hz.
BASS EO
is
also switched in.
The
REMOTE
jack enables dash mount level control of the LOW PASS signal.
MAXP4Z60N
4 CHANNEL AMPLIFIERS
The
AMPLIFIER CH IjZCH X-OVER
slide switch selects the input signal for
channel pair 1 & 2:
- HP:
Selects the built in
HIGH PASS
filter, variabe from 40 Hz to 2KHz.
- FULL:
Bypasses all crossovers for full ITequency range operation.
- LP:
Selects the built in
LOW PASS
filter, variabe ITom 30 Hz to 150Hz.
Note that the LOW PASS signal is
MONO.
- In the
LP
position, the
HIGH PASS
filter acts as a subsonic filter.
- When the
LP
mode is selected, a 0 to
+
1 0 dB, at 45 Hz,
BASS EO
is also
switched in.
The
AMPLIFIER CH 3jCH 4 X-OVER
slide switch selects the input signal
for channel pair 3&4
- HP:
Selects the built in
HIGH PASS
fiter, variable ITom 40 Hz to 2KHz.
- FULL:
Bypasses all crossovers for full frequency range operation.
- LP:
Selects the built in
LOW PASS
filter, variabe from 30 Hz to 150Hz.
Note that the LOW PASS signal is
MONO.
- In the
LP
pOSition, the
HIGH PASS
filter acts as a subsonic filter.
- When the LP mode is selected, a 0 to + 1 0 dB, at 45 Hz,
BASS EQ
is also
switched in.
- Full range signal ITom channels 1 j 2 inputs are routed to the
Une
OUT RCA
jacks, regardless of the setting of the
X-OVER
switches.
- The
REMOTEjack
enables dash mount level control of the LOW PASS signal,
CH3j4 only.
FEATURES
• Bass Boost Circuit
• Variable
low
Pass Crossover
• Anti-Thump Turn-On
• Tri-Mode Configurable
• Soft Turn On/Off
• RCA Line Input
• Blue Light Illuminated Lanzar Logo
• Power Protection lED Indicators
• Advanced Protection Circuitry
• Bass Boost Remote Control
• T.H.D: <0.05%
• SIN Ratio: >95dB
• Frequency Response: 10Hz-40KHz
Hide quick links:
Advertisement
